Just calling out in case someone has already solved this....
Looking to change my logging from the vintage sqlite/dashboard to using
ECM >> serial >> Raspberry PI > Btmon > InfluxDB
sure could use MQTT, but looking to keep everything tight, I will use grafana as the prettyness provider but not on the pi
any thoughts ?
btmon patch for RaspPi Influxdb
-
- Posts: 35
- Joined: Sat Jul 10, 2010 4:53 am
-
- Posts: 140
- Joined: Wed Dec 07, 2011 6:25 pm
Re: btmon patch for RaspPi Influxdb
hi roscoe,roscoe wrote:Just calling out in case someone has already solved this....
Looking to change my logging from the vintage sqlite/dashboard to using
ECM >> serial >> Raspberry PI > Btmon > InfluxDB
sure could use MQTT, but looking to keep everything tight, I will use grafana as the prettyness provider but not on the pi
any thoughts ?
mark clark has already written the mqtt extension. it is waiting to be merged on github (i plan to do the merge after i can test it more, probably in about 2 weeks' time). look in the pull requests:
https://github.com/matthewwall/mtools
i wrote an influx extension to weewx, and i've been running that for some time now to make sure i got the bugs out. i plan to port that over to btmon as soon as the mqtt changes have been merged.
m
-
- Posts: 2
- Joined: Sun Jan 23, 2011 1:51 pm
Re: btmon patch for RaspPi Influxdb
I am starting out with InfluxDB and Grafana and was just researching if anyone had a ECM-1240 to InfluxDB interface. I was glad to see Matt added the MQTT option to btmon. I can use Node-Red as the interface between MQTT and InfluxDB. But, if there was a btmon output to InfluxDB option, I would use it.
I am running InfluxDB and Grafana on a Pi 2 and everything is fine.
I am running InfluxDB and Grafana on a Pi 2 and everything is fine.
-
- Posts: 140
- Joined: Wed Dec 07, 2011 6:25 pm
Re: btmon patch for RaspPi Influxdb
mroch and roscoe57 have been tweaking an influxdb pull request. you might give that a try and let us know how it works for you.tgmaxx wrote:I am starting out with InfluxDB and Grafana and was just researching if anyone had a ECM-1240 to InfluxDB interface. I was glad to see Matt added the MQTT option to btmon. I can use Node-Red as the interface between MQTT and InfluxDB. But, if there was a btmon output to InfluxDB option, I would use it.
https://github.com/matthewwall/mtools/pull/4
i plan to merge the pr as soon as it is sufficiently tested.
-
- Posts: 2
- Joined: Sun Jan 23, 2011 1:51 pm
Re: btmon patch for RaspPi Influxdb
Ok thank you. I will check it out.