I have changed the gain on aux2 channel, btmon is still reporting the same wattage, am I missing something? I have one ct80 with black on common, white on aux2
Ron
btcfg: 0xfc: rcv
# settings for 0xfc at 2015/09/30 09:52:33
ct1 type = 167
ct1 range = 3
ct2 type = 169
ct2 range = 4
pt type = 230
pt range = 3
send frequency = 1
storage interval = 12
firmware version = 1.031
device id = 5
serial number = 201
gain X2: aux1[ ] aux2[X] aux3[ ] aux4[ ] aux5[ ]
trigger = 8000
checksum = 9 (ok)
X2 gain not working?
-
- Posts: 11
- Joined: Wed Sep 30, 2015 8:44 am
-
- Posts: 11
- Joined: Wed Sep 30, 2015 8:44 am
Re: X2 gain not working?
I think figured out, have to reboot unit. The btcfg reboot command doesn't appear to be
working I power cycled it.
rb - reboot device
q - exit btcfg
btcfg: 0xfc: rb
2015/09/30 10:01:21 'ECM1240Device' object has no attribute 'sendrlp'
working I power cycled it.
rb - reboot device
q - exit btcfg
btcfg: 0xfc: rb
2015/09/30 10:01:21 'ECM1240Device' object has no attribute 'sendrlp'