Hello,
I am looking at purchasing a setup that will monitor 44 circuits all with micro 40 CT, two split 200 CT and I want to monitor the solar inverter. Is ecm-1240 my best choice? I can't seem to get an email response or phone call from anyone at this company...
I appreciate any help with getting me all the proper items ordered.
Thanks.
New System Purchase. Questions.
-
- Posts: 1
- Joined: Wed Feb 11, 2015 7:35 am
-
- Posts: 2700
- Joined: Wed Dec 15, 2010 4:09 pm
- Location: The Bad Lands
Re: New System Purchase. Questions.
The best value would be to purchase a GEM since it has 32 channels, 8 temps, 4 pulse channels. You would however need to group the other 12 channels together. Otherwise your choice is to purchase two GEMs for monitoring. The ECM-1240 only supports 7 channels total so that would require 6-7 units.Andrew_SECOINC wrote:Hello,
I am looking at purchasing a setup that will monitor 44 circuits all with micro 40 CT, two split 200 CT and I want to monitor the solar inverter. Is ecm-1240 my best choice? I can't seem to get an email response or phone call from anyone at this company...
I appreciate any help with getting me all the proper items ordered.
Thanks.
Please forward a e-mail to ben@brultech.com
Teken . . .
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: New System Purchase. Questions.
Was out since Monday with an ear infection, back in the office now however.Andrew_SECOINC wrote:Hello,
I am looking at purchasing a setup that will monitor 44 circuits all with micro 40 CT, two split 200 CT and I want to monitor the solar inverter. Is ecm-1240 my best choice? I can't seem to get an email response or phone call from anyone at this company...
I appreciate any help with getting me all the proper items ordered.
Thanks.
Take a look at http://www.mypowerpanel.com/, we have more up-to-date information there. The GEM as Teken stated, is your best bet.
One GEM (32 channels) can likely cover all 44 circuits if you combine a few circuits onto channels (for example, outlet loads that aren't used too often, or loads that you aren't too interested in).
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: New System Purchase. Questions.
Tried to send over an email but got an undeliverable error. Feel free to email me at ben(at)brultech.com.
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com