It still connects the wifi that was configures and obtains an IP address
I am unable to connect the web interface.
It responds to pings
I unplugged it, removed the battery, held PB button, and plugged it back in. Then using the GEM Network Utility V7.0 I selected the recovery mode checkbox and clicked start. It shows the popup asking me to confirm it is set to 19200 baud, I click OK, below messages are printed in the little on screen window, it remains at 0.0%, Connected status turns red, msgbox appears with "Error 0", 0.0% changes to "Timesout Error!"
Code: Select all
Close connection
Open connection
Attempt to connect
Connected
TCP Connection OK