Dashbox with multiple GEM's

If you need help deciding on what monitor to get, which current transformers should you purchase for your panel, or anything else along these lines, start a thread here.
Post Reply
kennethogden
Posts: 7
Joined: Tue Nov 26, 2013 10:05 pm

Dashbox with multiple GEM's

Post by kennethogden » Sun Mar 06, 2016 11:58 am

Does the Dashbox work with the following configuration?

1 - GEM with wifi/ethernet (currently operating today)

(I would be purchasing one of the following configurations) to monitor a remote sub panel with 18 circuits.
2a - GEM connected via STS cable
or
2b - GEM connected via wifi/ethernet.

I've only been able to find support with dual GEM's when connected with the STS cables or zigbee.

Thanks,
Ken
ben
Site Admin
Posts: 4254
Joined: Fri Jun 04, 2010 9:39 am

Re: Dashbox with multiple GEM's

Post by ben » Mon Mar 07, 2016 10:54 am

kennethogden wrote:Does the Dashbox work with the following configuration?

1 - GEM with wifi/ethernet (currently operating today)

(I would be purchasing one of the following configurations) to monitor a remote sub panel with 18 circuits.
2a - GEM connected via STS cable
or
2b - GEM connected via wifi/ethernet.

I've only been able to find support with dual GEM's when connected with the STS cables or zigbee.

Thanks,
Ken
Yeah, it'll work with either configuration.

Is there Ethernet at the remote panel?
Ben
Brultech Research Inc.
E: ben(at)brultech.com
kennethogden
Posts: 7
Joined: Tue Nov 26, 2013 10:05 pm

Re: Dashbox with multiple GEM's

Post by kennethogden » Mon Mar 07, 2016 12:53 pm

Thanks for the quick response.

I plan on providing an ethernet connection via Powerline ethernet adapter.


Ken
Post Reply