www.brultech.com

Hello,

I am looking at purchasing a setup that will monitor 44 circuits all with micro 40 CT, two split 200 CT and I want to monitor the solar inverter. Is ecm-1240 my best choice? I can't seem to get an email response or phone call from anyone at this company...

I appreciate any help with getting me all the proper items ordered.

Thanks.

Andrew_SECOINC wrote:Hello,

I am looking at purchasing a setup that will monitor 44 circuits all with micro 40 CT, two split 200 CT and I want to monitor the solar inverter. Is ecm-1240 my best choice? I can't seem to get an email response or phone call from anyone at this company...

I appreciate any help with getting me all the proper items ordered.

Thanks.

The best value would be to purchase a GEM since it has 32 channels, 8 temps, 4 pulse channels. You would however need to group the other 12 channels together. Otherwise your choice is to purchase two GEMs for monitoring. The ECM-1240 only supports 7 channels total so that would require 6-7 units.

Please forward a e-mail to ben@brultech.com

Andrew_SECOINC wrote:Hello,

I am looking at purchasing a setup that will monitor 44 circuits all with micro 40 CT, two split 200 CT and I want to monitor the solar inverter. Is ecm-1240 my best choice? I can't seem to get an email response or phone call from anyone at this company...

I appreciate any help with getting me all the proper items ordered.

Thanks.

Was out since Monday with an ear infection, back in the office now however.

Take a look at http://www.mypowerpanel.com/, we have more up-to-date information there. The GEM as Teken stated, is your best bet.

One GEM (32 channels) can likely cover all 44 circuits if you combine a few circuits onto channels (for example, outlet loads that aren't used too often, or loads that you aren't too interested in).

Tried to send over an email but got an undeliverable error. Feel free to email me at ben(at)brultech.com.