Discuss anything which doesn't fall into the other categories here.
-
ben
- Site Admin
- Posts: 4262
- Joined: Fri Jun 04, 2010 9:39 am
Post
by ben » Mon May 13, 2013 10:29 am
Teken wrote:
I could do that, but will need to price out what the final costs will be to complete this task. If there is a cheaper method that is turn key to simply attach the sensor and also have all of the required equipment to simply attach to the GEM that would be ideal.
I never knew getting into water pulse monitoring would be so difficult!
Teken . . .
You could try playing with a diffuse sensor, you may have already read through this thread:
http://www.brultech.com/home/community/ ... ?f=2&t=480.
Ben
Ben
Brultech Research Inc.
E: ben(at)brultech.com
-
Teken
- Posts: 2700
- Joined: Wed Dec 15, 2010 4:09 pm
- Location: The Bad Lands
Post
by Teken » Mon May 13, 2013 10:31 am
ben wrote:Teken wrote:
I could do that, but will need to price out what the final costs will be to complete this task. If there is a cheaper method that is turn key to simply attach the sensor and also have all of the required equipment to simply attach to the GEM that would be ideal.
I never knew getting into water pulse monitoring would be so difficult!
Teken . . .
You could try playing with a diffuse sensor, you may have already read through this thread:
http://www.brultech.com/home/community/ ... ?f=2&t=480.
Ben
Yeah, I didn't have much luck finding the sensor from the EBAY seller. If there are other companies who have a all in on solution which is reasonable.
I would love to know about it!
Teken . . .
-
ben
- Site Admin
- Posts: 4262
- Joined: Fri Jun 04, 2010 9:39 am
Post
by ben » Wed May 15, 2013 11:27 am
Teken wrote:ben wrote:Teken wrote:
I could do that, but will need to price out what the final costs will be to complete this task. If there is a cheaper method that is turn key to simply attach the sensor and also have all of the required equipment to simply attach to the GEM that would be ideal.
I never knew getting into water pulse monitoring would be so difficult!
Teken . . .
You could try playing with a diffuse sensor, you may have already read through this thread:
http://www.brultech.com/home/community/ ... ?f=2&t=480.
Ben
Yeah, I didn't have much luck finding the sensor from the EBAY seller. If there are other companies who have a all in on solution which is reasonable.
I would love to know about it!
Teken . . .
It's hard to suggest something. It's going to depend on the reflect range, and reflective-ness of the meter.
Maybe you can reply to the thread and see if anyone has any suggestions.
Ben
Ben
Brultech Research Inc.
E: ben(at)brultech.com
-
phoenixsecure
- Posts: 68
- Joined: Sat Aug 21, 2010 10:03 am
Post
by phoenixsecure » Wed May 15, 2013 7:31 pm
I am using the water meter that is on the online store. Work great. Around 100$, easy to install.
