Page 1 of 1
Peak not showing on power graph
Posted: Thu Nov 09, 2023 3:51 pm
by johnstonf
When I watch my sump pump using live, it shows about 550W for about 10s, but back on my power graph only shows peak around 150W, and this happens consistently about 8x/hr all day.
Why doesn't it show that peak?
Thanks
Re: Peak not showing on power graph
Posted: Fri Nov 10, 2023 10:22 am
by ben
johnstonf wrote: ↑Thu Nov 09, 2023 3:51 pm
When I watch my sump pump using live, it shows about 550W for about 10s, but back on my power graph only shows peak around 150W, and this happens consistently about 8x/hr all day.
Why doesn't it show that peak?
Thanks
Power graph default shows average watts over the 1 minute interval.
- Click the Date/Unit button in the top-middle bar.
- Select Peak Watts.
That should show you the highest peak between packets for the minute.
Re: Peak not showing on power graph
Posted: Fri Nov 10, 2023 3:08 pm
by johnstonf
Well I'll be darned!
Thanks!