When I watch my sump pump using live, it shows about 550W for about 10s, but back on my power graph only shows peak around 150W, and this happens consistently about 8x/hr all day.
Why doesn't it show that peak?
Thanks
Peak not showing on power graph
-
- Posts: 138
- Joined: Mon Aug 08, 2016 10:03 am
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: Peak not showing on power graph
Power graph default shows average watts over the 1 minute interval.
- Click the Date/Unit button in the top-middle bar.
- Select Peak Watts.
That should show you the highest peak between packets for the minute.
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Posts: 138
- Joined: Mon Aug 08, 2016 10:03 am
Re: Peak not showing on power graph
Well I'll be darned!
Thanks!
Thanks!