Split-30 CT type?
Posted: Tue Mar 07, 2017 6:37 pm
I just received my system and am reviewing "GreenEye/Dashbox System" Installation Manual (SYS-MAN Ver 2.2). The top of page 13 says "The following CT models are “Type A”: SPLIT-30, SPLIT-60, SPLIT-100, SPLIT-200, SPLIT-400/600, SPLIT-170". But near the bottom of page 14, it says "The SPLIT-30 is a “Type B” CT and the connection method for Type B
described above applies. The only difference is the addition of a capacitor inserted in terminals 1
and 4."
So, is a Split-30 a Type A or a Type B CT? And if capacitors are required for each Split-30 connect, where do I get them and what is their specification?
This information is in a section of the manual called "CONNECTING TWO CTS ON ONE CHANNEL", so I think it's saying that if I want to connect two Split-30s to one channel, then I need the capacitor of some unknown specification? However, the accompanying picture seems to show only a single CT being connected in conjunction with the capacitor.
On the other hand, the GEM_Quick_Guide_QGD.pdf does list the Split-30 as a Type B, but it doesn't mention the use of a capacitor at all.
Since my package system came with 12 Split-30 CTs and no capacitors, I'll definitely need to know if I need a capacitor with each. I don't believe I will need to install two Split-30s on a single channel.
described above applies. The only difference is the addition of a capacitor inserted in terminals 1
and 4."
So, is a Split-30 a Type A or a Type B CT? And if capacitors are required for each Split-30 connect, where do I get them and what is their specification?
This information is in a section of the manual called "CONNECTING TWO CTS ON ONE CHANNEL", so I think it's saying that if I want to connect two Split-30s to one channel, then I need the capacitor of some unknown specification? However, the accompanying picture seems to show only a single CT being connected in conjunction with the capacitor.
On the other hand, the GEM_Quick_Guide_QGD.pdf does list the Split-30 as a Type B, but it doesn't mention the use of a capacitor at all.
Since my package system came with 12 Split-30 CTs and no capacitors, I'll definitely need to know if I need a capacitor with each. I don't believe I will need to install two Split-30s on a single channel.