Hi All
Recently bought GreenEye. I previously had 1240's from a PP-1-200 PLUG AND PLAY system. I want to re-use the CT's from the PP-1-200 PLUG AND PLAY, but they are not labeled, how do I tell what type they are?
Regards
mark
CT's from PP-1-200 PLUG AND PLAY
-
- Posts: 61
- Joined: Thu Oct 28, 2010 6:17 pm
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: CT's from PP-1-200 PLUG AND PLAY
I'll have to dig up some information, off-hand however.mark_anderson_us wrote:Hi All
Recently bought GreenEye. I previously had 1240's from a PP-1-200 PLUG AND PLAY system. I want to re-use the CT's from the PP-1-200 PLUG AND PLAY, but they are not labeled, how do I tell what type they are?
Regards
mark
The big splits will be Split-200 CTs.
The smallest Micro-CTs will be Micro-40s (smaller then a quarter).
The next-up Micro-CTs will be Micro-80s (about the same size as a quarter).
If there's any smaller split CTs, they're likely Split-60s.
EDIT:
Looks like :
2 Split-200s
10 Micro-40s
2 Micro-80s
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Posts: 61
- Joined: Thu Oct 28, 2010 6:17 pm
Re: CT's from PP-1-200 PLUG AND PLAY
Thanks Ben