Showing usage when breaker off
-
- Posts: 8
- Joined: Sat Jul 11, 2015 2:35 pm
Showing usage when breaker off
I have one channel/breaker that shows 3 to 4 watts usage. It is a double pole that I think goes to the central air heat element. I have turned it off and even pulled the breaker, but doesn't stop usage. I also turned off the other two breakers that feed the central heat/air unit. Didn't make any difference. Any thoughts?
-
- Posts: 2700
- Joined: Wed Dec 15, 2010 4:09 pm
- Location: The Bad Lands
Re: Showing usage when breaker off
More than likely its noise on the line which can be solved by placing a piece of thin insulated wire in channels 1 & 2 of that PJ.Okie69 wrote:I have one channel/breaker that shows 3 to 4 watts usage. It is a double pole that I think goes to the central air heat element. I have turned it off and even pulled the breaker, but doesn't stop usage. I also turned off the other two breakers that feed the central heat/air unit. Didn't make any difference. Any thoughts?
Teken . . .
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
-
- Posts: 8
- Joined: Sat Jul 11, 2015 2:35 pm
Re: Showing usage when breaker off
Ok help me a little further. Not sure what PJ is. Do you mean putting wire in where the CT connects to the GEM? if so I'm using 2&3 so what do I do?
-
- Posts: 2700
- Joined: Wed Dec 15, 2010 4:09 pm
- Location: The Bad Lands
Showing usage when breaker off
A PJ is the Plug Jack and you will simply insert a insulated piece of wire into channels 1 & 2.Okie69 wrote:Ok help me a little further. Not sure what PJ is. Do you mean putting wire in where the CT connects to the GEM? if so I'm using 2&3 so what do I do?
At the bottom of my signature is my install thread. Click on page 5 and almost near the bottom is a picture and a trouble shooting FAQ.
Ideals are peaceful - History is violent
Teken . . .
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10