Hi,
I have discovered the ecm-1240 after I searched for a solution to monitor my installation.
I found that the ecm-1240 was compatible with 50HZ installations using a special firmware.
Did some one know if it's still possible to order a 50Hz version ?
Regards,
Alex
ECM-1240 for europe install?
-
- Posts: 2
- Joined: Mon Jun 08, 2015 8:50 am
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: ECM-1240 for europe install?
We no longer carry 50Hz ECM-1240s. Our GEM however is 50Hz compatible.
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Posts: 2
- Joined: Mon Jun 08, 2015 8:50 am
Re: ECM-1240 for europe install?
Hi,
Thanks for the info.
How many lines can we monitor with the GEM in a 50Hz 240V single phase system?
Alex
Thanks for the info.
How many lines can we monitor with the GEM in a 50Hz 240V single phase system?
Alex
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: ECM-1240 for europe install?
The GEM has 32-channels (more information here http://www.mypowerpanel.com/greeneye/). So up to 32 breakers individually, or more if you don't mind combining some breakers onto one channel.psykok wrote:Hi,
Thanks for the info.
How many lines can we monitor with the GEM in a 50Hz 240V single phase system?
Alex
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com