Do I use 1 or 2 CTs on a 120v GFCI breaker?

Discuss anything which doesn't fall into the other categories here.
Post Reply
scyto
Posts: 258
Joined: Sun Apr 06, 2014 7:24 pm

Do I use 1 or 2 CTs on a 120v GFCI breaker?

Post by scyto » Sun May 18, 2014 10:20 pm

I have 2 breakers that are GFCI breakers. They have 2 wires, including a white. I assume this is a neutral? Should I use 1 or 2 CTs and if 1 which wire does it go on?
Top
tnakelski
Posts: 74
Joined: Tue Sep 11, 2012 1:27 pm

Re: Do I use 1 or 2 CTs on a 120v GFCI breaker?

Post by tnakelski » Mon May 19, 2014 10:24 am

scyto wrote:I have 2 breakers that are GFCI breakers. They have 2 wires, including a white. I assume this is a neutral? Should I use 1 or 2 CTs and if 1 which wire does it go on?
One Ct on the (hot/load/black) wire, not the white/neutral wire.
Top
Post Reply

Return to “General Discussion”