Hi
Is it possible to access the raw sampled voltage values of the ECM-1240 device? I want to see each voltage value that is sampled by the device (1-3kHz), so I can see the sinewave of the voltage. I don't want to see just the 1-second average or 1-second RMS voltage values.
This would obviously be a lot of data, so it may not be able to get it out of the serial connection fast enough.
Thanks.
Raw Voltage from ECM-1240?
-
- Posts: 5
- Joined: Sun Feb 06, 2011 4:11 pm
-
- Site Admin
- Posts: 4269
- Joined: Fri Jun 04, 2010 9:39 am
Re: Raw Voltage from ECM-1240?
It's not possible for the 1240 to send those values out unfortunately.copper23 wrote:Hi
Is it possible to access the raw sampled voltage values of the ECM-1240 device? I want to see each voltage value that is sampled by the device (1-3kHz), so I can see the sinewave of the voltage. I don't want to see just the 1-second average or 1-second RMS voltage values.
This would obviously be a lot of data, so it may not be able to get it out of the serial connection fast enough.
Thanks.
Ben
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Posts: 5
- Joined: Sun Feb 06, 2011 4:11 pm
Re: Raw Voltage from ECM-1240?
Ok, thanks, Ben.