Hi,
i had corruption in the GEM and had to start all over.
Everything is back to normal but the PT in old corrupted config was PT Type: 254 and PT Range: 160
After rebuilt i cant put back PT Range: 160
I have it at PT Type: 254 and PT Range: 4
Volt reading is 77.8V
I have tested our the PT xfor and i have 13.86 vac Original Brultech xformer.
Any Clue what is the problem.
PT & Voltage reading Issue
-
- Posts: 78
- Joined: Thu May 12, 2011 9:05 pm
- Location: Saint-Jean-sur-Richelieu, QC. Can
- Contact:
PT & Voltage reading Issue
Daniel Audet VA2DG
Saint-Jean-sur-Richelieu, QC. Can.
Saint-Jean-sur-Richelieu, QC. Can.
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: PT & Voltage reading Issue
I would update the COM to the latest at https://www.brultech.com/software before proceeding.
I'll email you over a manual to change your SN back.
https://www.brultech.com/software/files ... _v1.1_.pdf has all the PT settings for the various PTs we've gone thru. Given the 77V, it sounds like it's possibly Type: 205 Range:3.
I'll email you over a manual to change your SN back.
https://www.brultech.com/software/files ... _v1.1_.pdf has all the PT settings for the various PTs we've gone thru. Given the 77V, it sounds like it's possibly Type: 205 Range:3.
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Posts: 78
- Joined: Thu May 12, 2011 9:05 pm
- Location: Saint-Jean-sur-Richelieu, QC. Can
- Contact:
Re: PT & Voltage reading Issue
Thanks Ben
the PT is back on track with Type: 205 Range:3.
I notice the serial change due to corruption.
i have updated the COM to latest from 4.0
But in Dashbox still no update. Last packet update was yesterday at 2h44pm Nothinig has changed regarding the Serial connection between GEM and DB
Probably due to serial.? Should i remove this monitor and refresh?
the PT is back on track with Type: 205 Range:3.
I notice the serial change due to corruption.
i have updated the COM to latest from 4.0
But in Dashbox still no update. Last packet update was yesterday at 2h44pm Nothinig has changed regarding the Serial connection between GEM and DB
Probably due to serial.? Should i remove this monitor and refresh?
Daniel Audet VA2DG
Saint-Jean-sur-Richelieu, QC. Can.
Saint-Jean-sur-Richelieu, QC. Can.
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: PT & Voltage reading Issue
Don't remove it, change the serial number to something like 0110#### or 0100#### (01104234 for example).daudet wrote: ↑Wed Feb 21, 2024 9:59 amThanks Ben
the PT is back on track with Type: 205 Range:3.
I notice the serial change due to corruption.
i have updated the COM to latest from 4.0
But in Dashbox still no update. Last packet update was yesterday at 2h44pm Nothinig has changed regarding the Serial connection between GEM and DB
Probably due to serial.? Should i remove this monitor and refresh?
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com