PS/PT Gauge?

Ask questions about the GEM here.
Post Reply
tmrobert8
Posts: 23
Joined: Fri Feb 18, 2022 7:04 am

PS/PT Gauge?

Post by tmrobert8 » Mon Feb 21, 2022 2:13 pm

I need to extend the reach of the PS and PT about 2 feet - anyone know the gauge wire to use?
Top
Teken
Posts: 2700
Joined: Wed Dec 15, 2010 4:09 pm
Location: The Bad Lands

Re: PS/PT Gauge?

Post by Teken » Mon Feb 21, 2022 4:55 pm

For such a short run anything from 18 ~ 12 AWG is fine.

If you only have 22 ~ 20 AWG that’s fine too! Lastly, in the worst case scenario if you only had certified Ethernet cable which spans 23 ~ 24 AWG you can just double up the two pairs.
Teken . . .

My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
Top
tmrobert8
Posts: 23
Joined: Fri Feb 18, 2022 7:04 am

Re: PS/PT Gauge?

Post by tmrobert8 » Tue Feb 22, 2022 6:46 am

Thanks!
Top
Post Reply

Return to “GEM Support”