I am trying to update the firmware of my GEM-WE from 5.23 to the latest version of 5.39 and I get an Error 111: "It took more than 30 seconds for the progress to increment by 1%."
I am following the steps from this post:
https://brultech.com/community/viewtopic.php?f=3&t=2220
Is there a step that I am missing?
GEM Network Utility Error 111
-
- Posts: 2
- Joined: Tue Feb 08, 2022 11:36 pm
-
- Site Admin
- Posts: 4262
- Joined: Fri Jun 04, 2010 9:39 am
Re: GEM Network Utility Error 111
Is any other program trying to actively connect to the GEM (or is the Network setting in the GEM Setup Webpage set to send somewhere)? If so you might be getting unwanted bytes in between F/W bytes.tsai wrote: ↑Tue Feb 08, 2022 11:46 pmI am trying to update the firmware of my GEM-WE from 5.23 to the latest version of 5.39 and I get an Error 111: "It took more than 30 seconds for the progress to increment by 1%."
I am following the steps from this post:
https://brultech.com/community/viewtopic.php?f=3&t=2220
Is there a step that I am missing?
GEM Error 111.png
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Posts: 2
- Joined: Tue Feb 08, 2022 11:36 pm
Re: GEM Network Utility Error 111
Yes, that was the problem. I had to turn off the Data Post section as it was still trying to send data during the upgrade.
Thank you for your time.
Thank you for your time.