GEM/Standalone Dashboard - Bad Packet Not Numeric Error
Posted: Thu Jan 11, 2018 8:05 pm
Hi,
Today my Standalone Dashboard mysteriously stopped updating.
The Dashboard Raw Data log shows:
2018-01-11 19:47:53: Serial Number is 01000214 and seconds is 14971980
Bad Packet Not Numeric Channel 10
The GreenEye Monitor Packet Send shows:
GET /index.php/ecmEngine/greeneye?SN=01000214&SC=14971692&V=1218&c1=51751566160,722062,5.38&c2=107697859260,50156
33,1.62&c3=519392009,7597,0.08&c4=7056545041,18128,0.08&c5=1187344570,40300401,0&c6
=541594894,7527,0&c7=3447766660,109393,.40&c8=2534784751,115766,0.08&c9=3337142182
7,746708,4.14&c10=:0011295683,2096281,2.18&c11=7113819012,82916,1.24&c12=76534,3964
9,0&c13=9194526980,270868,0&c14=10403690930,2006429133,.12&c15=8681783573,8961,3.1
4&c16=116989010,26754411,.12&c17=982903852,53563636,0&c18=64747847409,13556630572
,.44&c19=4120942499,19372,0.08&c20=103170428,48636,0&c21=98019022,8659493,.12&c22=2
647844189,10479109,.44&c23=18495097800,740145,0&c24=136621340,2260721,0&c25=43419
6674,2070571,1.42&c26=27050989166,269889,1.90&c27=141096225194,12140396,.14&c28=18
276275917,4291509731,0.08&c29=6364711617,265360,0.08&c30=142803896,11490992,.12&c31
=898656832,85225006,.88&c32=13192928949,207039,1.20&c33=0,0,115.71&c34=0,0,3.08&c35
=0,0,726.34&c36=0,0,721.92&c37=0,0,1.68&c38=0,0,25.44&c39=0,0,0&c40=0,0,655.36&c41=0,
0,3.10&c42=0,0,481.28&c43=0,0,.34&c44=0,0,798.72&c45=0,0,3.36&c46=0,0,230.30&c47=0,0,5
22.24&c48=0,0,655.36&PL=0,0,0,0&T=64.0,64.0,67.0,67.0,86.5,107.5,,&key=&Resp= HTTP/1.1
Host: energy.mywatts.net
I noticed channel 10 has a colon after the equals sign. Would that be causing the problem and if so I do I correct it?
I've made no changes to my web hosting or GEM setup prior to the problem occuring.
- I'm using MySQL version of Dashboard
- using PHP 5.6 (changed to 7.0 to troubleshoot)
- COM version 4.32 (updated to COM version 4.33)
- I noticed I had a low battery error before updating and then an ERR2 after.
-I did a fresh install of the dashboard and SQL DB, pointed the GEM to it and I still get the same error on the Raw Data log.
Do you have any suggestions?
Thanks.
Today my Standalone Dashboard mysteriously stopped updating.
The Dashboard Raw Data log shows:
2018-01-11 19:47:53: Serial Number is 01000214 and seconds is 14971980
Bad Packet Not Numeric Channel 10
The GreenEye Monitor Packet Send shows:
GET /index.php/ecmEngine/greeneye?SN=01000214&SC=14971692&V=1218&c1=51751566160,722062,5.38&c2=107697859260,50156
33,1.62&c3=519392009,7597,0.08&c4=7056545041,18128,0.08&c5=1187344570,40300401,0&c6
=541594894,7527,0&c7=3447766660,109393,.40&c8=2534784751,115766,0.08&c9=3337142182
7,746708,4.14&c10=:0011295683,2096281,2.18&c11=7113819012,82916,1.24&c12=76534,3964
9,0&c13=9194526980,270868,0&c14=10403690930,2006429133,.12&c15=8681783573,8961,3.1
4&c16=116989010,26754411,.12&c17=982903852,53563636,0&c18=64747847409,13556630572
,.44&c19=4120942499,19372,0.08&c20=103170428,48636,0&c21=98019022,8659493,.12&c22=2
647844189,10479109,.44&c23=18495097800,740145,0&c24=136621340,2260721,0&c25=43419
6674,2070571,1.42&c26=27050989166,269889,1.90&c27=141096225194,12140396,.14&c28=18
276275917,4291509731,0.08&c29=6364711617,265360,0.08&c30=142803896,11490992,.12&c31
=898656832,85225006,.88&c32=13192928949,207039,1.20&c33=0,0,115.71&c34=0,0,3.08&c35
=0,0,726.34&c36=0,0,721.92&c37=0,0,1.68&c38=0,0,25.44&c39=0,0,0&c40=0,0,655.36&c41=0,
0,3.10&c42=0,0,481.28&c43=0,0,.34&c44=0,0,798.72&c45=0,0,3.36&c46=0,0,230.30&c47=0,0,5
22.24&c48=0,0,655.36&PL=0,0,0,0&T=64.0,64.0,67.0,67.0,86.5,107.5,,&key=&Resp= HTTP/1.1
Host: energy.mywatts.net
I noticed channel 10 has a colon after the equals sign. Would that be causing the problem and if so I do I correct it?
I've made no changes to my web hosting or GEM setup prior to the problem occuring.
- I'm using MySQL version of Dashboard
- using PHP 5.6 (changed to 7.0 to troubleshoot)
- COM version 4.32 (updated to COM version 4.33)
- I noticed I had a low battery error before updating and then an ERR2 after.
-I did a fresh install of the dashboard and SQL DB, pointed the GEM to it and I still get the same error on the Raw Data log.
Do you have any suggestions?
Thanks.