My new GEM will not get here for several days and I would like to do some conduit prep.
Can someone tell me the size of the knockouts in the bottom of the GEM, the distance between them (center to center), and the distance from the center of the knockouts to the back (wall)?
~Mike
GEM knockout locations
-
- Posts: 17
- Joined: Sat Jul 17, 2010 10:32 pm
GEM knockout locations
Satisfied Brultech customer since 2008.
-
- Posts: 2700
- Joined: Wed Dec 15, 2010 4:09 pm
- Location: The Bad Lands
Re: GEM knockout locations
Hello Mike,Frugal wrote:My new GEM will not get here for several days and I would like to do some conduit prep.
Can someone tell me the size of the knockouts in the bottom of the GEM, the distance between them (center to center), and the distance from the center of the knockouts to the back (wall)?
~Mike
The GEM case has three knock outs one on the top left and two on the bottom. The knock outs are (approx) 5/8" in diameter. The top knock out is 1/4" from the body frame on either side. The bottom knock outs are (approx) 1/2" from the sides and 1/4" from the back wall.
Page 19 of the GEM install manual will show you a good picture of the approx distance of the knock outs. The rear of the base of the case has an addition 4 knock outs.
https://www.brultech.com/software/files/getsoft/1/1
Teken . . .
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
-
- Posts: 17
- Joined: Sat Jul 17, 2010 10:32 pm
Re: GEM knockout locations
So, if the GEM case is 7 1/8" wide, I think that gives me 5 1/2" center to center.Teken wrote:Hello Mike,Frugal wrote:My new GEM will not get here for several days and I would like to do some conduit prep.
Can someone tell me the size of the knockouts in the bottom of the GEM, the distance between them (center to center), and the distance from the center of the knockouts to the back (wall)?
~Mike
The GEM case has three knock outs one on the top left and two on the bottom. The knock outs are (approx) 5/8" in diameter. The top knock out is 1/4" from the body frame on either side. The bottom knock outs are (approx) 1/2" from the sides and 1/4" from the back wall.
Page 19 of the GEM install manual will show you a good picture of the approx distance of the knock outs. The rear of the base of the case has an addition 4 knock outs.
https://www.brultech.com/software/files/getsoft/1/1
For your amusement: My laptop computer runs Linux Mint and uses a program called okular to display pdf files. The title bar of the okular window shows the document title from the pdf internal properties. For the current GEM manual, that title is "ECM-1220 User's Manual".
Satisfied Brultech customer since 2008.
-
- Site Admin
- Posts: 4261
- Joined: Fri Jun 04, 2010 9:39 am
Re: GEM knockout locations
I'll let Paul know to update the title of that manual.Frugal wrote:So, if the GEM case is 7 1/8" wide, I think that gives me 5 1/2" center to center.
For your amusement: My laptop computer runs Linux Mint and uses a program called okular to display pdf files. The title bar of the okular window shows the document title from the pdf internal properties. For the current GEM manual, that title is "ECM-1220 User's Manual".
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com