Page 3 of 3
Re: Net Alias can't exceed 25 characters error when saving
Posted: Mon Oct 16, 2017 2:47 pm
by ben
Teken wrote:For the benefit of others who may stumble upon this thread and need to do the very same. When Ben indicates the CT Type / CT Range needs to be manually adjusted. You will select the channel in question (In Red) then change the CT Type / CT Range values (In red) to the desired numerical values to obtain the most accurate readings.
You also need to switch the green dropdown to Manual in your screenshot.
Re: Net Alias can't exceed 25 characters error when saving
Posted: Mon Oct 16, 2017 2:49 pm
by Teken
ben wrote:Teken wrote:For the benefit of others who may stumble upon this thread and need to do the very same. When Ben indicates the CT Type / CT Range needs to be manually adjusted. You will select the channel in question (In Red) then change the CT Type / CT Range values (In red) to the desired numerical values to obtain the most accurate readings.
You also need to switch the green dropdown to Manual in your screenshot.
Doh . . . I highlighted it earlier but must have snapped back to the previous setting. I'll reload it again didn't even notice that!
Re: Net Alias can't exceed 25 characters error when saving
Posted: Mon Oct 16, 2017 3:22 pm
by Teken
For the benefit of others so they don't need to scan hundreds of threads to find this specific information there is a sticky thread on this process:
http://www.brultech.com/community/viewt ... =29&t=1812