Page 1 of 1
Data to multiple places?
Posted: Sun Jun 25, 2017 7:43 pm
by brassfly
Does anyone know if its possible to send data to a home automation controller (Homeseer) over IP, and connect up Emoncms to the COM2 serial (with a usb adapter) on a RaspPI?
Re: Data to multiple places?
Posted: Sun Jun 25, 2017 8:16 pm
by Teken
I understood there was an existing plugin for HS already in place. Don't know if it supports sending / receiving the data to a RPi though.
=========================
The highest calling in life is to serve ones country faithfully - Teach others what can be. Do what is right and not what is popular.
Re: Data to multiple places?
Posted: Mon Jun 26, 2017 8:18 am
by brassfly
Yes, I've got it working with Homeseer on Com 1 of the GEM, but the graphing is fairly rough, and I'm not convinced that it's getting data reliably. I was thinking I could use the Com2 of the GEM directly into a Rp3 running Emoncms..
Re: Data to multiple places?
Posted: Mon Jun 26, 2017 9:14 am
by ben
You can likely do so via btmon.py as COM2 is limited to using binary formats when running a different packet format on both ports.