Data to multiple places?
-
- Posts: 19
- Joined: Sun Mar 12, 2017 7:45 pm
Data to multiple places?
Does anyone know if its possible to send data to a home automation controller (Homeseer) over IP, and connect up Emoncms to the COM2 serial (with a usb adapter) on a RaspPI?
-
- Posts: 2700
- Joined: Wed Dec 15, 2010 4:09 pm
- Location: The Bad Lands
Re: Data to multiple places?
I understood there was an existing plugin for HS already in place. Don't know if it supports sending / receiving the data to a RPi though.
=========================
The highest calling in life is to serve ones country faithfully - Teach others what can be. Do what is right and not what is popular.
=========================
The highest calling in life is to serve ones country faithfully - Teach others what can be. Do what is right and not what is popular.
Teken . . .
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
-
- Posts: 19
- Joined: Sun Mar 12, 2017 7:45 pm
Re: Data to multiple places?
Yes, I've got it working with Homeseer on Com 1 of the GEM, but the graphing is fairly rough, and I'm not convinced that it's getting data reliably. I was thinking I could use the Com2 of the GEM directly into a Rp3 running Emoncms..
-
- Site Admin
- Posts: 4260
- Joined: Fri Jun 04, 2010 9:39 am
Re: Data to multiple places?
You can likely do so via btmon.py as COM2 is limited to using binary formats when running a different packet format on both ports.
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com