1-wire temp sensors unexpectedly all reset to 32F
Posted: Thu Apr 06, 2017 2:47 pm
I have (5) 1-wire temp sensors feeding my GEM. They feed from the interior of a freezer to a basement rec room. Usually reporting from -5F to 67F. This afternoon (2:05pm) they all began to read 32F. Everything else on the GEM is reading OK. All status indicators are green. System has been running in a steady state for 4 months with everything reporting properly.
I am running COM 4.0 and ENG 1.49. Any ideas on what has happened?
More importantly, any suggestions on how to recover those sensors? Should I just re-boot the GEM?
I am running COM 4.0 and ENG 1.49. Any ideas on what has happened?
More importantly, any suggestions on how to recover those sensors? Should I just re-boot the GEM?