Hi,
I guess it's my time to report lost communication to GEM, however it's still sending data to my Vera - counters are updated. When I try to connect to configuration page - no chance, also Network Utility reports timeout. Both LEDs are green, first also red from time to time.
Reboot via powerplug restores communication for a while but after disconnecting comm fails.
My unit is WiFi only
Any sugestions?
LoWang
Lost WiFi connection to GEM
-
- Posts: 9
- Joined: Wed Apr 01, 2015 1:53 pm
Lost WiFi connection to GEM
Last edited by lowang on Thu Jul 02, 2015 4:03 pm, edited 1 time in total.
-
- Site Admin
- Posts: 4262
- Joined: Fri Jun 04, 2010 9:39 am
Re: Lost WiFi connection to GEM
Try enabling COM1 Auto Reset in the Advanced section. It should make communication more reliable.
Set it to a value like 250.
Set it to a value like 250.
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Posts: 9
- Joined: Wed Apr 01, 2015 1:53 pm
Re: Lost WiFi connection to GEM
Thanks Ben,
my com1 is already set to 100 and yet no access via browser or netutil.
my com1 is already set to 100 and yet no access via browser or netutil.
-
- Site Admin
- Posts: 4262
- Joined: Fri Jun 04, 2010 9:39 am
Re: Lost WiFi connection to GEM
The WiFi-only units can be a bit tricky. Have you tried connecting to it multiple times? It can take a few tries as you have to catch it between packets.
What's your send interval?
What's your send interval?
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com