I recently installed a VFD for my well pump which includes a pressure transducer for reading water pressure. Its' output is 4-20mA corresponding to 0-100psi. Just wondering it it would be possible to tap the outputs and send them to the GEM and have it output PSI (calculated psi)?
Thanks,
Nathan
Reading pressure transducer
-
- Posts: 57
- Joined: Mon Apr 20, 2015 3:37 pm
- Location: New Brunswick
-
- Site Admin
- Posts: 4262
- Joined: Fri Jun 04, 2010 9:39 am
Re: Reading pressure transducer
We're unfortunately not setup to monitor that.nbarnard wrote:I recently installed a VFD for my well pump which includes a pressure transducer for reading water pressure. Its' output is 4-20mA corresponding to 0-100psi. Just wondering it it would be possible to tap the outputs and send them to the GEM and have it output PSI (calculated psi)?
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com