Reading pressure transducer

Ask questions about the GEM here.
Post Reply
nbarnard
Posts: 57
Joined: Mon Apr 20, 2015 3:37 pm
Location: New Brunswick

Reading pressure transducer

Post by nbarnard » Mon Jun 08, 2015 9:09 pm

I recently installed a VFD for my well pump which includes a pressure transducer for reading water pressure. Its' output is 4-20mA corresponding to 0-100psi. Just wondering it it would be possible to tap the outputs and send them to the GEM and have it output PSI (calculated psi)?

Thanks,
Nathan
Top
ben
Site Admin
Posts: 4262
Joined: Fri Jun 04, 2010 9:39 am

Re: Reading pressure transducer

Post by ben » Tue Jun 09, 2015 10:27 am

nbarnard wrote:I recently installed a VFD for my well pump which includes a pressure transducer for reading water pressure. Its' output is 4-20mA corresponding to 0-100psi. Just wondering it it would be possible to tap the outputs and send them to the GEM and have it output PSI (calculated psi)?
We're unfortunately not setup to monitor that.
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Top
Post Reply

Return to “GEM Support”