In the GEM Setup Live Data Screen, the Amp values shown for channels 17-32 are duplicates of the Amp values for channels 1-16 (which are correct for 1-16 but not for 17-32.)
This seems to be a display problem only. The correct wattage values are computed and displayed, and the correct amperage values are being sent to the DashBox.
Running COM 3.17 and ENG 1.49.
GEM Setup Live Data repeats ch 1-16 amps for ch 17-32
-
- Posts: 107
- Joined: Wed Oct 01, 2014 6:45 am
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: GEM Setup Live Data repeats ch 1-16 amps for ch 17-32
I'll get Paul to post the latest tomorrow. It looks like this is resolved in 3.18.peppersass wrote:In the GEM Setup Live Data Screen, the Amp values shown for channels 17-32 are duplicates of the Amp values for channels 1-16 (which are correct for 1-16 but not for 17-32.)
This seems to be a display problem only. The correct wattage values are computed and displayed, and the correct amperage values are being sent to the DashBox.
Running COM 3.17 and ENG 1.49.
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com