This is really pretty trivial, but I need to know as I am relocating my load center. Can the GEM be wall mounted such that the name tag and LED's are on the "sides" of the unit instead of bottom/top? In other words, can it be mounted so that it is 9.25"W x 7.25"H instead of 7.25"W x 9.25"H?
Thanks,
Ira
GEM mounting options
-
- Posts: 53
- Joined: Sat Jul 10, 2010 11:06 am
-
- Posts: 2700
- Joined: Wed Dec 15, 2010 4:09 pm
- Location: The Bad Lands
GEM mounting options
Hello Ira,
The GEM has KO ( knock outs ) on the top, bottom and back side of the unit.
So, if you need to orientate the GEM side ways that's entirely up to you.
Please note this does not mean you can change the position of the GEM's main board within the housing.
Encrypted By: Phoenix Security Solutions
The GEM has KO ( knock outs ) on the top, bottom and back side of the unit.
So, if you need to orientate the GEM side ways that's entirely up to you.
Please note this does not mean you can change the position of the GEM's main board within the housing.
Encrypted By: Phoenix Security Solutions
Teken . . .
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10