GEM in Australia
-
- Posts: 2
- Joined: Tue May 20, 2014 1:48 am
GEM in Australia
Hi guys,
Ive sent two emails with no response so ill try on here.
I live in Melbourne, Australia and I'm looking at using your Green Eye Monitor.
Would like GEM be compatible with Australia supply voltage (230V AC - 50Hz)?
Do you ship to Australia?
Ive sent two emails with no response so ill try on here.
I live in Melbourne, Australia and I'm looking at using your Green Eye Monitor.
Would like GEM be compatible with Australia supply voltage (230V AC - 50Hz)?
Do you ship to Australia?
-
- Posts: 2700
- Joined: Wed Dec 15, 2010 4:09 pm
- Location: The Bad Lands
Re: GEM in Australia
Hello Mike,mikelg wrote:Hi guys,
Ive sent two emails with no response so ill try on here.
I live in Melbourne, Australia and I'm looking at using your Green Eye Monitor.
Would like GEM be compatible with Australia supply voltage (230V AC - 50Hz)?
Do you ship to Australia?
The installation manual states (page 46) that the GEM can be configured for 50 Hz via software. The PT (Potential Transformer) input voltage from 120 - 480 volts. The manual indicates an alternate part number of PT01 (please confirm with Brultech) if that is the correct one for your region.
Please send in another quote / sales request to both support and sales alias.
Teken . . .
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
-
- Site Admin
- Posts: 4262
- Joined: Fri Jun 04, 2010 9:39 am
Re: GEM in Australia
Hey Mike,mikelg wrote:Hi guys,
Ive sent two emails with no response so ill try on here.
I live in Melbourne, Australia and I'm looking at using your Green Eye Monitor.
Would like GEM be compatible with Australia supply voltage (230V AC - 50Hz)?
Do you ship to Australia?
The GEM is compatible, you'll have to source your own power supply, we have 50Hz PTs.
May take a few days right now to get a quote, we're in the middle of catching up due to the holidays.
Ben
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Posts: 2
- Joined: Tue May 20, 2014 1:48 am
Re: GEM in Australia
thanks guys how do i go about apply for a quote.
im wanting to buy the ethernet/wi-fi GEM. with the wifi, will i need the zigbee and the etherbee also
thanks in advance
Michael
im wanting to buy the ethernet/wi-fi GEM. with the wifi, will i need the zigbee and the etherbee also
thanks in advance
Michael
-
- Posts: 2700
- Joined: Wed Dec 15, 2010 4:09 pm
- Location: The Bad Lands
Re: GEM in Australia
Hello Michael,mikelg wrote:thanks guys how do i go about apply for a quote.
im wanting to buy the ethernet/wi-fi GEM. with the wifi, will i need the zigbee and the etherbee also
thanks in advance
Michael
Please send in a request to the following Brultech alias: sales@brultech.com and CC : support@brultech.com
You do not need the Zigbee radio unless you're interfacing with something like the UDI ISY-994 Home Automation Controller. I do believe that if you wish to communicate via Zigbee from the GEM to Dash Box.
That is another method but most folks communicate via the STS cable, Wifi, Ethernet.
Teken . . .
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
My ongoing projects thread: http://www.brultech.com/community/viewt ... ?f=2&t=929
Buy me a cup of coffee: https://www.paypal.me/Teken https://gfinotify.com/ Discount Code: PC10
-
- Site Admin
- Posts: 4262
- Joined: Fri Jun 04, 2010 9:39 am
Re: GEM in Australia
We're currently out-of-stock on WiFi/Ethernet modules. We only have WiFi or Ethernet options available.Teken wrote:Hello Michael,mikelg wrote:thanks guys how do i go about apply for a quote.
im wanting to buy the ethernet/wi-fi GEM. with the wifi, will i need the zigbee and the etherbee also
thanks in advance
Michael
Please send in a request to the following Brultech alias: sales@brultech.com and CC : support@brultech.com
You do not need the Zigbee radio unless you're interfacing with something like the UDI ISY-994 Home Automation Controller. I do believe that if you wish to communicate via Zigbee from the GEM to Dash Box.
That is another method but most folks communicate via the STS cable, Wifi, Ethernet.
Ben
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Posts: 258
- Joined: Sun Apr 06, 2014 7:24 pm
Re: GEM in Australia
Mwah ha ha I took the last one...ben wrote: We're currently out-of-stock on WiFi/Ethernet modules. We only have WiFi or Ethernet options available.
Ben