Parts ordered, Temp still ornery!

[brassfly]

Ok, I ordered the resistors to make the USB PT adapter.

The temp sensors:
I have done the search and it finds the only one I have attached, and I've saved it to the config as well.

[Teken]

Would you happen to have other 1 wire sensors available that aren't in the 10 series?


=========================

The highest calling in life is to serve ones country faithfully - Teach others what can be. Do what is right and not what is popular.

[ben]

Temporarily switch your packet format to HTTP Get, then click the Show Packet button. Check if it shows up as the 1st temperature sensor there.

What COM F/W are you running? I'll check to Paul to see if that's been fixed in a later version.

[brassfly]

So sorry to have created another thread on this, not quite for sure how that happened. Feel free to move it back under the other one.

I checked the rest of my temp sensors, sadly, they are all the 10 series. Does that make a difference?

Switched to HTTP GET

GET extension_here?SN=01000126&SC=16744439&V=1268&c1=1033540328432,1094593519325&c2=885120923155,7
66750215295&c3=978390499883,1086604231374&c4=786173734108,554667830600&c5=1887034
36360,731854819742&c6=133011766697,936353635535&c7=268637412261,663374394883&c8=1
58606159258,362854717566&c9=912229667741,260542582716&c10=613487004135,2707353928
56&c11=1024350080662,859059818779&c12=939655950067,329746510156&c13=284762227018,
956217318579&c14=600185605047,549302755279&c15=301119439492,870448860920&c16=7728
24055727,312827964904&c17=555832861272,659782322727&c18=786341236210,909035695515
&c19=654788671854,102161662237&c20=689821586795,118116243358&c21=124243369669,839
652503811&c22=563389606163,372831140595&c23=1097899769074,738747775698&c24=617990
616328,841507089454&c25=867104396990,831022469083&c26=625393456058,682211395677&c
27=848799466979,955478178970&c28=564501774975,863132376462&c29=156209805243,14140
833500&c30=548646696823,513658887465&c31=242577719635,417045187003&c32=9253894794
77,807129435177&PL=10441138,1890863,7730079,7999910&T=nc,5,,,,,,&key=key1_here&Resp=
HTTP/1.1 Host: host_here.com

I'm currently on the following firmware:
COM firmware ver: 4.32
ENG firmware ver: 1.49
RealTime Status: ON
Packet Send Interval: 8
Pri. Packet Format: 4
Sec. Packet Format: 0

[Teken]

Hello,

If its possible could you purchase just one 1 wire sensor from another vendor and report back what the results are. Also, would you please offer a photo of the colored wires from the 1 wire sensors.

To date I haven't seen or heard of anyone ever having issues with the 1 wire sensors besides myself. Meaning, I received a huge batch of sensors which were just duds from the seller.

[brassfly]

Sure, I'll look into grabbing another one. The one I'm using I've used before, and I've tested 3-4 of them. Currently I'm using bare DS1820s, the one I'm testing with right now is actually just jammed in the 1wire port on the GEM.

[Teken]

What are the color of the wires? Is the standard red (power) black (ground) yellow (data)?




=========================

The highest calling in life is to serve ones country faithfully - Teach others what can be. Do what is right and not what is popular.

[brassfly]

Just bare sensors, no colors.

[Teken]

Just for clarity the 1 wire chip is plugged in using the flat side as the reference point from left to right.

Pin 1 Ground
Pin 2 Data
Pin 3 Positive (VDC)

[ben]

I'll ask Paul to take a look at the GEM firmware. Based on what you've shown, it shouldn't be happening.