If you have netcat installed you could try shutting off the port HA-side and run:
Code: Select all
nc -l 8000
Code: Select all
nc -l 8000
Yeah, that looks good. The SSH session will get weird as PuTTy won't know how to display some of those characters.
The packet format wouldn't be affected by the comm. module and yeah, one or the other should show something given your config (the Dashbox or the GEM).crazydane wrote: ↑Fri Nov 12, 2021 11:36 amWith the GEM above pointing directly to HA I of course deleted the port forwarding on the dashbox so that only one or the other is sending to HA at a time.
Both behave the same. With greeneye-monitor disabled in the yaml config, I see binary data coming to HA, but I see nothing under integration.
Someone suggested that the Ethernet only GEM module does not properly support 32 Bit NET and that I would need to upgrade to the EthernetWifi combo module. Any truth to that?
Regardless, that should not keep the dashbox from being able to send packets to HA that would be properly intercepted.
Maybe something about my setup is just not compatible with HA?
Code: Select all
python btmon.py --print --debug --device-type=gem --ip --ip-mode=server --ip-port 8000