Hi All
I have two 1240's connected to mux and want to connect each one to dedicated serial port (40 ft cables). Anyone know the wiring setup to go direct from 1240 to DB-9?
thanks
Mark
Serial Cable Pin-out
-
- Posts: 61
- Joined: Thu Oct 28, 2010 6:17 pm
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: Serial Cable Pin-out
It's the same for the GEM and ECM-1240, bottom-right of the diagram has the pin-out.mark_anderson_us wrote: I have two 1240's connected to mux and want to connect each one to dedicated serial port (40 ft cables). Anyone know the wiring setup to go direct from 1240 to DB-9?
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Posts: 61
- Joined: Thu Oct 28, 2010 6:17 pm
Re: Serial Cable Pin-out
ben wrote:It's the same for the GEM and ECM-1240, bottom-right of the diagram has the pin-out.mark_anderson_us wrote: I have two 1240's connected to mux and want to connect each one to dedicated serial port (40 ft cables). Anyone know the wiring setup to go direct from 1240 to DB-9?
Thanks