Serial Cable Pin-out

Post any 3rd party software here.
Post Reply
mark_anderson_us
Posts: 61
Joined: Thu Oct 28, 2010 6:17 pm

Serial Cable Pin-out

Post by mark_anderson_us » Wed Nov 05, 2014 11:44 am

Hi All

I have two 1240's connected to mux and want to connect each one to dedicated serial port (40 ft cables). Anyone know the wiring setup to go direct from 1240 to DB-9?

thanks

Mark
Top
ben
Site Admin
Posts: 4262
Joined: Fri Jun 04, 2010 9:39 am

Re: Serial Cable Pin-out

Post by ben » Wed Nov 05, 2014 12:49 pm

mark_anderson_us wrote: I have two 1240's connected to mux and want to connect each one to dedicated serial port (40 ft cables). Anyone know the wiring setup to go direct from 1240 to DB-9?
It's the same for the GEM and ECM-1240, bottom-right of the diagram has the pin-out.
GEM Communication layout.png
GEM Communication layout.png (156.2 KiB) Viewed 2480 times
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Top
mark_anderson_us
Posts: 61
Joined: Thu Oct 28, 2010 6:17 pm

Re: Serial Cable Pin-out

Post by mark_anderson_us » Wed Nov 05, 2014 2:20 pm

ben wrote:
mark_anderson_us wrote: I have two 1240's connected to mux and want to connect each one to dedicated serial port (40 ft cables). Anyone know the wiring setup to go direct from 1240 to DB-9?
It's the same for the GEM and ECM-1240, bottom-right of the diagram has the pin-out.
GEM Communication layout.png

Thanks
Top
Post Reply

Return to “3rd Party Software”